- VAG KKL 409.1 will be fully suitable with nearly all for VW/ for AUDI/ for SEAT/ for SKODA vehicles including those with KKL, but without CAN-BUS. VAG-COM 409.1 KKL interface (adapter) is usually utilized as an interface and a USB cable connection to link a for VW/ for AUDI automobile to a Computer with USB interface for on-board diagnostics (OBD).
- VAGCOM KKL cable Use version 2.10.0 at If you happen to have a copy of drivers that you have confirmed to work with your cable can you. Pins 17 and 20 of the round 20 pin connector are both K lines, 6 cylinder BMW's use pin 20 and some 4 cylinder cars use pin 17 for TXD. The L line (RXD), which is pin.
Vag Kkl 409.1 Crack
Vag com 409.1 is KKL USB diagnostic interface for automobiles. You have to Install Vag com 409.1 KKL USB Drive before you use Vag com 409.1 KKL USB. Do you know how to do it? If not, please just follow the Vag com 409.1 KKL USB Drive installtion steps beolow.
VAG KKL USB 409.1 Fiat Ecu Scan KKL Switch Fiat ALFA
Note: These instructions are only to be used in case the automatic driver installation is not successful. These instructions are for Windows XP. Installation under Windows 98/ME/2000 is similar, but not necessarily identical.
1. Make sure you have already downloaded and installed VAG-COM on your PC before following these instructions.
2. Allow the software you just downloaded to install itself on your PC. If you choose to install it someplace other than the default location, make a note of folder you're installing it to.
3. Plug your Ross-Tech USB Interface to your PC's USB port (It is not necessary to connect the interface to a car yet). A message like this should appear on your PC's Taskbar:
NOTE: If the new Hardware Found Wizard popup does not appear when you plug in your interface, go into Device Manager and look for the interface. In Windows XP, you can typically find the Device Manager by RIGHT-CLICKING on My Computer then selecting Manage. Your Ross-Tech USB Interface should be under Universal Serial Bus (USB) Controllers or under Other Devices. If it's there, Right-Click it and then select Update Driver. Then you can start at Step 4 in the instructions below.
4. The New Hardware Found Wizard should appear:
5. On the screen above, select 'Install from a list or specific location (Advanced)'
then click the [Next >] button.
6. The following dialog should appear: